Self Aligning Ball Bearings
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.Self-Aligning Ball Bearings utilize two rows of balls and a common, concave outer race to automatically compensate for angular misalignment within a system. Misalignment, either from machining errors, assembly errors, or deflections, are a common risk in precise applications and Self-Aligning Ball Bearings present a viable solution.
- 25 mm x 52 mm x 18 mm FAG 2205-TVH Self Aligning Ball Bearings
- PT INTERNATIONAL
- 2.406
- 15 mm x 35 mm x 14 mm FAG 2202-TVH Self Aligning Ball Bearings
- 2.165 Inch | 55 Mill
- Bearing
- 90 mm x 160 mm x 40 mm FAG 2218-TVH Self Aligning Ball Bearings
- 35MM Bore; 62MM Outs
- Specifications for H
- FAG 1210-TVH-C3 Self Aligning Ball Bearings
- Tapered Roller Beari
- Standard
- 15 mm x 42 mm x 17 mm FAG 2302-TVH Self Aligning Ball Bearings
- SCHAEFFLER GROUP
- Bearings
- FAG 2314-M-C3 Self Aligning Ball Bearings
- 31171547
- Yes
- 95 mm x 200 mm x 67 mm FAG 2319-M Self Aligning Ball Bearings
- FAG BEARING
- 11.024 Inch | 280 Mi
- 40 mm x 80 mm x 23 mm FAG 2208-2RS-TVH Self Aligning Ball Bearings
- Rogersville, TN
- No
